Thank you Matt and Rod, I will contact Schafer to see what they can do ?,
Thanks all who replied with suggestions or guidance, I have located round normal O
rings which I have to replce every time I make a beer presently about 2 a year ,

"Rodd Snook" <usenet@snookums.NOSPAM.port5.com> wrote in message
news:pan.2003.11.16.04.20.49.99004@snookums.NOSPAM.port5.com...[color=blue]
> On Sat, 15 Nov 2003 12:28:36 +0000, Matt_Hendry wrote:
>[color=green]
> > you cant find the seals for these kegs as the breweries have control
> > over them and a 50 liter keg is still the property of the brewery unless
> > you brought it new from a Shafer (the manufacture ) reseller I know of
> > only one in Sydney that sells small quantities and them the minimum you
> > can buy is about 10 .its almost impossible to find parts for Shafer kegs
> > .[/color]
>
> Well, the only distributor for Schafer that I know of can be found at
> [url]http://www.kegsystems.com/[/url]
>
> If the OP's keg is a schafer, then these guys might be able to help him
> out. Just send them an e-mail or phone them up -- can't hurt to ask. They
> were friendly enough when I contacted them about postmix gear.
>
> Rodd
>[/color]