i started brewing my first batch of beer on tuesday night. my concern
is that it has stopped bubling only after two days of brewing.do i
need to make any changes to what i am doing?

> i started brewing my first batch of beer on tuesday night. my concern[color=blue]
> is that it has stopped bubling only after two days of brewing.do i
> need to make any changes to what i am doing?[/color]

Almost certainly you don't have a problem. Most of the fermentation
is done at the beginning, especially if the room temperature was
fairly high (68F or more).

To be sure that it is done before you bottle, you should let it sit until
a hydrometer reading is the same for around 3 days, OR let it sit about
2 weeks. you bottle.

Just continue with what your instructions say to do. You may want
to read [url]http://www.howtobrew.com/[/url] for a lot of good background
material. (You should let it sit until a hydrometer reading is
the same for 3 days or so, OR let it sit about 2 weeks - to be sure
that it is done before you bottle).

Derric