I've done a couple of batches with my King Keg and I am pretty happy
with the results but now I'd like to know if it is possible to run a
line from it to a tap on my bar. I guess what I am after is some sort
of adapter/valve to replace the plastic tap on the King Keg.

Has anyone done this or have any suggestions?

Thanks in advance,

QFK...

On 11 Nov 2003 00:43:10 -0800, [email]QuestForKnowledge@RetroManInAVan.co.uk[/email]
(TheQuestForKnowledge) wrote:
[color=blue]
>I've done a couple of batches with my King Keg and I am pretty happy
>with the results but now I'd like to know if it is possible to run a
>line from it to a tap on my bar. I guess what I am after is some sort
>of adapter/valve to replace the plastic tap on the King Keg.
>
>Has anyone done this or have any suggestions?
>
>Thanks in advance,
>
>QFK...[/color]

Hi

I have Hambleton Bard BeerSpheres, which are pretty similar to King
Kegs. I replaced the primitive, crappy taps they came supplied with,
with "Lyne Flip Top taps" which are a huge improvement.

Whilst I dispense straight from the keg using the optional Lyne
sparkler, I notice that in the Lyne tap instruction sheet it mentions
as an optional extra - quote: "Remote Take-Off (Takes 3/8" Push On
Fitting".

I assume that these can be connected fairly easily to a tap on a bar.
I have often thought of doing this but never got round to it.

Regards
KGB

Replace "for" in "careforfree" with 4 - the rest should be obvious!!